Toro Commercial Zero Turn Mowers
G3 Series - 74925
$9,199.99
|
|
For Pick-Up Only
Please call for more details
800.916.9473
|
|
|
Specifications
29 hp Engine Kawasaki® FX801V
Air Filter Dual stage canister
Cutting Deck 7-gauge 60" TURBO FORCE®
with bull nose-bumper
Adjustable Discharge Baffle Included
Spindle Housings Cast iron
Spindle Bearings Geasable tapered roller bearings
Blades 1/4" thick heat-treated steel
Blade Tip Speed 18,500+ ft/min
Height of Cut 1" - 5.5" in 1/4" increments
Discharge Chute High-performance rubber
Carrier Frame 3" x 1-1/2" tubular steel
Ground Speed 11.5 mph forward, 7 mph rev
Hydraulic Drive System Unitized pumps and wheel motors
Hydraulic Fluid Premium synthetic
Drive Tires 24" x 12.0"-12"
Caster Tires 13" x 6.5"-6" flat-free semi-pneumatic
Steering Controls 1-5/8" dia. levers; adjustable
Fuel Capacity Gasoline - 12 gallons
ROPS Folding; standard
|
|
Accessories
|
- The industry's toughest spindle assembly - Toro's rugged spindle assemblies survive impacts that would
destroy lesser spindles. The cast iron housing, with a massive 9-3/8" diameter base, absorbs impact loads and
distributes them across a broader area of the robust deck shell.
- Exclusive TURBO FORCE® Deck - High-capacity TURBO FORCE decks deliver unsurpassed strength, a
superior cut, and increased productivity in extreme mowing conditions.
- 7-gauge, high-strength steel - Constructed of high-strength 7-gauge steel (50,000 psi minimum yield strength),
the deck shell is extremely resistant to impacts and abrasion. At a full 5-1/2" deep, the TURBO FORCE deck has
more than enough capacity to handle the most demanding conditions. Comparison based on 7-gauge high-
strength steel versus 10-gauge commercial steel
- A flat, crisp cut with precision blades. - 1/4" thick precision blades resist flexing to provide a flat, crisp cut.
High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly
associated with abrasive conditions.
- Smarter design in a bull-nose bumper. - 7-gauge bull-nose bumper not only protects against frontal impacts,
but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the
deck is raised 1/4", allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut.
Leaf "plowing" during spring and fall clean-up is also significantly reduced.
- Patented Adjustable Baffle - Allows operator to achieve maximum cutting performance by fine-tuning deck to
conquer changing conditions, at unique job sites or different times of the season. In extreme conditions, the baffle
can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the
baffle can be closed to yield micro-sized particles and maximize discharge velocity.
- Rubber Discharge Chute - High performance rubber discharge chute allows for close trimming without
damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
- Smooth, Powerful Response - The new unitized pump and wheel motor use proven commercial hydraulic
components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while
enjoying an even more reliable machine.
- Convenience and Comfort - Not only will you be comfortable choosing a Z Master G3, you'll be comfortable
riding on one. The custom seat features large bolsters, thick cushions and 3-D isolator mounts that absorb bumps
and vibrations to reduce operator fatigue. Operator controls are conveniently grouped in a single location. Large
diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for
cell phone, tools, and more. Built-in cup holder provided.
- Operator Information Center - The instrument panel includes a digital hour meter, fuel gauge, and voltage
meter, as well as diagnostic indicators for the safety interlock system.
- Folding Rollover Protection System ROPS - A Rollover Protection System (ROPS), complete with seat belt,
comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where
sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily
unlocked and folded down with ease thanks to the convenient quick release pins.
- Heavy Duty Air Cleaner - Deluxe 2-stage air cleaner protects engine from contaminants and prolongs product
life.
- Comprehensive Warranty* - 5-year or 1,200-hour limited warranty with limited lifetime frame warranty. (2-year
commercial engine warranty.) *See Toro dealer for complete warranty detail.
|
|
|
|
 |
|
|
Showroom Location
Wise Equipment & Rental, Inc
1475 Rodenburg Rd
Schaumburg, Illinois 60193
Local: 847.895.5555
Toll Free: 800.916.9473
|
|
Showroom/Store Hours (CST)
Monday - 9am - 7pm
Tuesday - Friday 9am - 6pm
Saturday - 9am - 5pm
Sunday - 9am - 4pm
|
|
|
|
Phone Hours(CST)
Monday - Friday 7:30 am to 7:30 pm
Saturday & Sunday - 8:00am to 5:00pm
|
|
|
|
|
|
